Graduate Student Thesis

---

Go to John W. Sutherland's Research Page | Publications.

In the table below is the list of Graduate Students Advised or Co-Advised By John W. Sutherland. Included are the students' thesis titles. To view the associated abstract click on the underlined thesis title. The Ph.D. theses can be ordered directly from the UMI Dissertation Service, using the order number listed below.

---

Sr. #	Thesis Title	Graduate Student	Thesis	Year	UMI  Order Number
57	An Experimental Investigation of Metal Working Fluid Mist Formation During the Wet Turning Process and Mist Reduction Using a Kinematic Coagulation System	Lisa Ann Kukula	M.S. Thesis MTU	2004
56	Cutting Fluid Mist Formation and Behavior Mechanisms	Jichao Sun	PhD Thesis MTU	2004
55	Inventory and Value Management in Demanufacturing Facilities	Kenneth L. Gunter	PhD Thesis MTU	2004
54	Application of Input-Output Modeling to the Environmental Characterization and Improvement of Manufacturing Processes	Huanran Xue	PhD Thesis MTU	2003
53	Modeling the Effect of Cutting Fluids in Peripheral Milling	Ge Shen	PhD Thesis MTU	2003
52	A Model for Predicting Manufacturing Wasted in Product Design and Process Planning	Karl R. Haapala	M.S. Thesis MTU	2003
51	An Energy Model for Discrete Product Manufacturing	Krian N. Khadke	M.S. Thesis MTU	2002
50	An Investigation into the Effects of Lubrication, Surface Finish, and Clearance on Machine Tool Slideway Damping and Friction	Ram M. Kuchibhotla	M.S. Thesis MTU	2002
49	Development of a Computational Fluid Dynamics Model for Assessment of Lubricant Performance in a Manual Transmission Gear Mesh	David M. Pariseau	M.S. Thesis MTU	2002
48	A Model for Multi-Stage Machining Economics Including Cutting Fluid Related Costs	Lucas. P. Keranen	M.S. Thesis MTU	2002
47	Magnetostrictive Actuations to Achieve Dry Deep Hole Drilling of Aluminum	Aleksandar Filipovic	PhD Thesis MTU	2002
46	Gradient Theory: Application on Dislocation Dynamics and Adiabatic Shear Bands Formed in Metal Cutting	Kyriaki Kalaitzidou	M.S. Thesis MTU	2002
45	A Comparison of Electric Power Assist Steering with Hydraulic Power Assist Steering for Automotive Applications	Eric W. Barrett	M.S. Thesis MTU	2002
44	An Experimental Investigation of Cutting Fluid Mist Removal by an Atomizer System	Siddhartha S. Kinare	M.S. Thesis MTU	2002
43	An Analysis of Workpiece Thermostructural Distortions in Peripheral Milling by Finite Element Method	Sarang R. Garud	M.S. Thesis MTU	2002
42	Assessing the Environmental Impact of Product Design Decisions Across the Life Cycle	Gordon A. Bekkala	M.S. Thesis MTU	2002
41	Development of a Model for Material Flows and Economic Exchanges within the U.S. Automotive Life Cycle Chain	Anup P. Bandivadekar	M.S. Thesis MTU	2002
40	An Investigation into the Effects of Processing Conditions on Airborne Emissions from the Lost Foam Casting Process	Steven U. Behm	M.S. Thesis MTU	2001
39	A Comprehensive Model for Cutting Fluid Mist Formation in Machining	Yan Yue	PhD Thesis  MTU	2000	9959380
38	A CFD Investigation of Cutting Fluid Mist Formation via Atomization	Yeow Siow	M.S. Thesis   MTU	2000
37	A VFML Based Feature Representation and Recognition Technique with Application to Machining Processes	Abhilesh Bhargava	M.S. Thesis  MTU	2000
36	Role of Cutting Fluids in Workpiece Temperature and Surface Error in Peripheral Milling	Ashish Gandhi	M.S. Thesis  MTU	1999
35	An Experimental Investigation of Cutting Fluid Mist Formation via Atomization in the Turning Process	Kenneth Gunter	M.S. Thesis  MTU	1999
34	A Comprehensive Model for the Dynamic Force System in Peripheral Milling Including the Effects of Flank Face Interference	Santosh Ranganath	PhD Thesis  MTU	1999	9923648
33	Modeling of the Thread Tapping Process: Chip Formation and Cutting Fluid Lubrication	Tengyun Cao	PhD Thesis  MTU	1998	9923636
32	Cutting Fluid System Dynamics: Modeling and Control	Aleksandar Filipovic	M.S. Thesis  MTU	1998
31	Experimental Investigation of Vibration and Damping of Machine Tool Slideways	Ching Hung	M.S. Thesis  MTU	1998
30	An Analystical and Experimental Investigation into Chip Morphology in Orthogonal Machining	Steve Batzer	PhD Thesis  MTU	1998	9829766
29	A Continuum Mechanics Model for Orthogonal Cutting	Yuliu Zheng	PhD Thesis  MTU	1998	9829734
28	Analysis and Modeling of Angular Errors in Precision Sliding Motion with Application to Machine Tools	Cecil M. Daniel	PhD Thesis  MTU	1998	9829768
27	Vibration Abatement in a Turning Process via Application of an Activity Controlled Tool Holder	Dongming Liu	PhD Thesis  MTU	1998	9823056
26	Application of Goal Programming to Reduce the Environmental Impact of Machining Processes	Nilesh Soni	M.S. Thesis  MTU	1997
25	Reducing the Environmental Impact of the Drilling Process	Amy Wheaton Bergstrom	M.S.Thesis  MTU	1997
24	Prediction of Chip Morphology in Orthogonal Machining Processes	Praveen D. Rao	M.S. Thesis  MTU	1997
23	Characterization of the Dynamic Behavior of a Cutting Fluid System	Hrishikesh Gowaikar	M.S. Thesis  MTU	1997
22	A Study of Structural Characteristics of a Stewart Platform Based Machine Tool	Vivek Saxena	M.S. Thesis  MTU	1997
21	Prediction of Cylinder Boring Surface Errors With and Without Cutting Fluids	Hong Li	M.S. Thesis  MTU	1997
20	Force Prediction in Drilling Incorporating an Asperity Interface Model	Deborah M. Haan	M.S. Thesis  MTU	1996
19	A Dynamic Model of the Cutting Force System in End Milling Including the Effects of Process Damping	Kannan Narayanan	M.S. Thesis  MTU	1996
18	Micropositioning in the Turning Process via Magnetostrictive Actuation	William Kanizar	M.S. Thesis  MTU	1996
17	Environmental Design Decisions for Discrete Product Parts Based on Geometric Attributes	Chris Wentland	M.S. Thesis  MTU	1996
16	Multicriteria Optimization of Environmentally Conscious Mechanical Design Decisions	Charles Inman Whitmer II	M.S. Thesis  MTU	1995
15	Geometric Modelling of Wheel and Workpiece Surfaces in Grinding	K. V. Domala	M.S. Thesis  MTU	1995
14	A Study of Cutting Fluids and Workpiece Surface Error in the Boring of Cast Aluminum Alloys	Doug Cozzens	M.S. Thesis  MTU	1995
13	Interferometric Surface Texture Measurement in the Presence of Error Sources	Erik J. Salisbury	PhD Thesis  MTU	1995
12	An Investigation on the Shearing of Automotive Grade Polypropylene and Acrylonitrile-Butadiene-Styrene to Facilitate Automotive Recycling	Kristin Philipps	M.S. Thesis  MTU	1995
11	Robust Design of an Automotive Suspension System	Sreeram Parameswaran	M.S. Thesis  MTU	1994
10	Product Value Modeling of Time Varying Quality Measures	Srikanth Vadrevu	M.S. Thesis  MTU	1994
9	An Investigation of an Active Tool Holder Employing Magnetostrictive Actuationwith Application to a Turning Process	Tim Sturos	M.S. Thesis  MTU	1994
8	Course work only degree plan	Jeffrey P. Webb	M.S. Thesis  MTU	1993
7	Course work only degree plan	Doug Trudeau	M.S. Thesis  MTU	1993
6	A Force-Based Flute Breakage Detection Algorithm for a Peripheral End Milling Process	D. J. O'Brien	M.S. Thesis  Degree from UIUC	1990
5	The Effect of Tool Geometry and Tool Wear on the Cutting Force System in Turning	D. A. Gustafson	M.S. Thesis  Degree from UIUC	1990
4	The Development of a Power/Energy Consumption Model for Multiprocess Machining Operations	D. G. Mattes	M.S. Thesis  Degree from UIUC	1990
3	A Dynamic Model of the Cutting Force System in the Turning Process	W. J. Endres	M.S. Thesis  Degree from UIUC	1990
2	The Prediction and Effects of Flute Breakage on the End Milling Process	M. S. Wagner	M.S. Thesis  Degree from UIUC	1988
1	The Prediction of Cutting Forces and Surface Accuracy for the Turning Process	M. J. Kuhl	M.S. Thesis  Degree from UIUC	1987

---

Go to John W. Sutherland'sResearch Page

| Publications.

If you have any comments or suggestions please e-mail jwsuther@mtu.edu.